how to limit GPU clock (and thus temperature) automatically?

Message boards : Graphics cards (GPUs) : how to limit GPU clock (and thus temperature) automatically?

Author	Message
Erich56 Send message Joined: 1 Jan 15 Posts: 1132 Credit: 10,267,132,676 RAC: 28,868,347 Level Scientific publications	Message 50201 - Posted: 4 Aug 2018 \| 19:01:42 UTC
	With a PC on which I recently installed Windows 10, I have two problems when running GPUGRID. The problem with the graphic driver crashing (nvlddmkm) is being discussed in the "Number Crunching" thread here anyway. What I'd like to know now is: once in a while, the system shuts down by itself and reboots right thereafter. So, when I set BOINC to start together with Windows, I could theoretically make GPUGRID continue in such a situation. However, the problem is that normally I use the NVIDIA Inspector to limit the GPU temperature to 60/61°C. From what I have seen, normally the GPU would run at a much higher temperature (which I don't want to happen). Fact is, that the NVIDIA Inspector cannot be set to start together with Windows; and even if this was possible: it needs to set the values manually. Can anyone give me advice if there is a way to handle this problem? Can I set somewhere else a GPU temperature limit so that if the system shuts down and reboots, this limit is observed?
	ID: 50201 \| Rating: 0 \| rate: / Reply Quote

3de64piB5uZAS6SUNt1GFDU9d... Send message Joined: 20 Apr 15 Posts: 285 Credit: 1,102,216,607 RAC: 0 Level Scientific publications	Message 50202 - Posted: 4 Aug 2018 \| 20:44:42 UTC Last modified: 4 Aug 2018 \| 20:51:04 UTC
	my recommendation is https://efmer.com/download-tthrottle/ there you can set a maximum threshold temperature to power down the PC when exceeded. I use this tool for emergency shutdown only although it has a throttling function as well. But for this purpose I run MSI afterburner, keeping my GPU temps well below a 70°C temperature limit. https://de.msi.com/page/afterburner Both programs can be configured to start automatically after reboot. ____________ I would love to see HCF1 protein folding and interaction simulations to help my little boy... someday.
	ID: 50202 \| Rating: 0 \| rate: / Reply Quote

Erich56 Send message Joined: 1 Jan 15 Posts: 1132 Credit: 10,267,132,676 RAC: 28,868,347 Level Scientific publications	Message 50203 - Posted: 4 Aug 2018 \| 21:11:19 UTC - in response to Message 50202.
	... https://de.msi.com/page/afterburner Both programs can be configured to start automatically after reboot. Okay, just to be sure: if in Afterburner the GPU temp is set to say 60°C, this temp will remain set also after automatic restart of Windows and Afterburner?
	ID: 50203 \| Rating: 0 \| rate: / Reply Quote

mmonnin Send message Joined: 2 Jul 16 Posts: 337 Credit: 7,640,505,653 RAC: 10,762,309 Level Scientific publications	Message 50205 - Posted: 4 Aug 2018 \| 22:30:06 UTC - in response to Message 50203.
	... https://de.msi.com/page/afterburner Both programs can be configured to start automatically after reboot. Okay, just to be sure: if in Afterburner the GPU temp is set to say 60°C, this temp will remain set also after automatic restart of Windows and Afterburner? Yes it can auto load a profile at system boot. An option might be to lower the voltage and power limits in Afterbuner to achieve the desired temperature at a given fan speed. This allows the chip to continue running at full song within those limits vs starting and stopping the app all the time. There are also options to change the fan speed at given temperatures.
	ID: 50205 \| Rating: 0 \| rate: / Reply Quote

3de64piB5uZAS6SUNt1GFDU9d... Send message Joined: 20 Apr 15 Posts: 285 Credit: 1,102,216,607 RAC: 0 Level Scientific publications	Message 50210 - Posted: 5 Aug 2018 \| 8:08:54 UTC - in response to Message 50203. Last modified: 5 Aug 2018 \| 8:10:41 UTC
	... https://de.msi.com/page/afterburner Both programs can be configured to start automatically after reboot. Okay, just to be sure: if in Afterburner the GPU temp is set to say 60°C, this temp will remain set also after automatic restart of Windows and Afterburner? yes that is correct. I use both TThrottle and Afterburner because my GPUs sometimes went into an endless loop for whatever reason (probably an application or driver error) and the temperatures went up despite Afterburner trying to lower the clocks. In those rare cases, a second "watchdog" program that shuts down the entire system is a great idea … and it actually saved my cards a couple of times. So I strongly recommend that to everyone. ____________ I would love to see HCF1 protein folding and interaction simulations to help my little boy... someday.
	ID: 50210 \| Rating: 0 \| rate: / Reply Quote

Post to thread

Message boards : Graphics cards (GPUs) : how to limit GPU clock (and thus temperature) automatically?

	About	Science	Volunteers	Performance	Forum	Join us	Donate