Good day,

I do not know to whom I should address this but I have noticed that GPUGRID under utilise my GTX 1070 by 10% on the GPU and by 50% on the RAM.

I place an extract from GPU-Z below:
Memory Used [MB] , GPU Load [%] , Memory Controller Load [%]
4063 , 90 , 45

Is there anyway of improving this on my side or is it something that has to be done Server side?

I would like it to be as time efficient as possible - the GPU runs at 60C and completes WUs in and around the 12Hr mark.

Regards
Riaan
____________

Memory is OK
GPU Load is OK You could try using Environment Variable Swan_Sync 1

You're fine and most WUs are fine but one of my cards, GK104 on short WU GERARD_NONAGGRE_cmpd1 is only using 54% utilization and my gpu is at 45C. It's also very long for a short WU.

You could try running 2 tasks at once with a app_config.xml file in you projects directory. The latest GERARD_MO_ tasks were only giving me 54% GPU utilization on GTX980s in a win7 box with swan_sync enabled. Running two at a time I am getting 80% load. Same story with the GERARD_NONAGGRE tasks on my GTX670s.

<app_config>
<app>
<name>acemdbeta</name>
<gpu_versions>
<gpu_usage>1</gpu_usage>
<cpu_usage>1.00</cpu_usage>
</gpu_versions>
</app>
<app>
<name>acemdlong</name>
<gpu_versions>
<gpu_usage>.5</gpu_usage>
<cpu_usage>1.00</cpu_usage>
</gpu_versions>
</app>
<app>
<name>acemdshort</name>
<gpu_versions>
<gpu_usage>.5</gpu_usage>
<cpu_usage>1.00</cpu_usage>
</gpu_versions>
</app>
</app_config>