To what extent would I be degrading the life of a 780Ti by overvolting it?

In my system I have 2 780Ti graphics cards, both by evga, the first one and top card is a super clocked model which I could push to 1256Mhz core and +84Mhz memory stably; The second and lower card was a normal, but used card I had added for extra power when I got a 4k monitor. When putting them in sli config, their clocks change to 979 and 1006Mhz. So I tried putting setting the offset to +140 core and +84 memory (the highest stable I had on the original) and when benchmarking, the top card rarely touches the 106.3% power limit or voltage limit and keeps it's temp in the low 70s; the bottom card can handle the memory offset fine but the core offset is to much for it, it stays around 2 degrees cooler, fans about 8% higher, and regularly hits the power limit and voltage limit and is not very stable. (using most recent precisionX)

As for cooling I am using the reference style blower cards, power supply intakes air from the bottom and out the back, my cpu uses an h80i also set up to push air out the back, I have about 12% room to play with on the cards fans.

It will be probably 2 or 3 years before I can upgrade again, so in that time how high could I reasonably turn up the voltage? would I be better of setting a more aggressive fan profile? would it be very advantageous to create a profile with different overclocks on each card to use for crunching with sli disabled for when I'm not planning on gaming? How significant is the power draw on the cards lights?

Also, how bad is it for the server for a workunit to fail? unfortunately, the only way to know if it's stable on gpugrid is to test it.

To what extent would I be degrading the life of a 780Ti by overvolting it?

As for cooling I am using the reference style blower cards,

I have about 12% room to play with on the cards fans.

Would I be better of setting a more aggressive fan profile?

would it be very advantageous to create a profile with different overclocks on each card to use for crunching with sli disabled for when I'm not planning on gaming?

How significant is the power draw on the cards lights?

Also, how bad is it for the server for a workunit to fail? unfortunately, the only way to know if it's stable on gpugrid is to test it.

I hope you don't mind if I throw a few more batches of questions your way.

When you say severe overvolting, do you mean outside the limits of precisionX (75mV)?

Also, I've found that the cards will reach their max boost speeds (not overclocked) independent of each other when in sli and running the gpugrid application only if I have the power target maxed.
____________

When you say severe overvolting, do you mean outside the limits of precisionX (75mV)?

Also, I've found that the cards will reach their max boost speeds (not overclocked) independent of each other when in sli and running the gpugrid application only if I have the power target maxed.

Turns out that the superclocked card had a faulty vrm and in retrospect I should have noticed this a long time ago, but because nothing crashed and the clocks would reset themselves after restarting the computer I figured that it was an overclocking issue. When I realized that the same thing was happening with stock clocks, I wrote the company and they told me to send it back.

To my surprise, the good people at evga replaced it with a 980 superclocked with acx cooler.

To my surprise, the good people at evga replaced it with a 980 superclocked with acx cooler.

Damn daniel! I was going to recommend taking off the stock fan and applying some 20 dollar thermal paste that isnt electrically conductive so it has lower chances of frying your system. Then you got new gear, so I wouldnt really risk it. Anyways, I know the old 570s I used to get I was unable to remove the fans cause the screws seemed saudered even tho they were philips head. But new fans, add some thermal paste, I would say out of limited experience to just the chip itself, drop your gpu temps, fastest way to do it in my opinion. I always buy gpus with 3 fans.