Hello,

My GPU takes a while to crunch the wu, so in order to get the bonus credits for finishing on time, is there a way so that two wu's dont download and only only one? I want a way that could preferably not touch the amount of work stored as I have other projects that need to store wu for.

Thanks.

In the BOINC manager-options, on the computing tab change Other-"Store at least" to a low number like .25 or even .15 days of work. On next line set to 0 days of work. If BOINC runs correctly it will calculate your required time to finish computing and will send a new unit when the running one is almost complete.

I already know about this. Doing this will reduce work for other projects, which I don't want.

Try setting resource share to 0 here in GPUGrid, in your profile on this site. It should work then. However, if you have other GPU projects running on same PC too, GPUGrid will not get tasks, unless the other GPU projects run out of work. If this is the only project for GPU, it should work. (Naturally it would also affect all work from GPUGrid, but I'm not sure there's CPU work at the moment, if you even do that).

Normally I do this, for my backup project, so that will start to work when there is no work here. It may be only solution for what you want, as what I can think of.

I think this will work, but will download two wu's, meaning I have to abort one or just suffer the credit loss. So far, I have to set it to No New Work and just allow it to fetch work before the wu finishes up so that it doesn't get two.

I think this will work, but will download two wu's

I think this will work, but will download two wu's

No. If you set the resource share to 0, it will download only one workunit after the workunit in progress is finished, uploaded & reported, so you should set the "report_results_immediately" tag in the cc_config.xml to 1 to avoid idle times.

Hi, I'm using this: filename cc_config.xml

<!--
This is a minimal configuration file cc_config.xml of the BOINC core client.
For a complete list of all available options and logging flags and their
meaning see: https://boinc.berkeley.edu/wiki/client_configuration
-->
<cc_config>
<log_flags>
<task>1</task>
<file_xfer>1</file_xfer>
<sched_ops>1</sched_ops>
</log_flags>
<options>
<report_results_immediately>1</report_results_immediately>
</options>
</cc_config>


Greets

Hi, I'm using this: filename cc_config.xml

<!--
This is a minimal configuration file cc_config.xml of the BOINC core client.
For a complete list of all available options and logging flags and their
meaning see: https://boinc.berkeley.edu/wiki/client_configuration
-->
<cc_config>
<log_flags>
<task>1</task>
<file_xfer>1</file_xfer>
<sched_ops>1</sched_ops>
</log_flags>
<options>
<report_results_immediately>1</report_results_immediately>
</options>
</cc_config>


Greets

I don't know exactly :-(
All i did after installation of boinc-client was to include <options> in this file. It's a linux system so i don't know if the windows-boinc-client is installed the same way.
Just give it a try ;-)

Hi, I'm using this: filename cc_config.xml

<!--
This is a minimal configuration file cc_config.xml of the BOINC core client.
For a complete list of all available options and logging flags and their
meaning see: https://boinc.berkeley.edu/wiki/client_configuration
-->
<cc_config>
<log_flags>
<task>1</task>
<file_xfer>1</file_xfer>
<sched_ops>1</sched_ops>
</log_flags>
<options>
<report_results_immediately>1</report_results_immediately>
</options>
</cc_config>


Greets

Thanks, can I remove the log_flags so I don't get the notifications and still have it work?

Thank you for your help.

Thank you for your help.

Well, I did have one I posted here on this thread if you could take a look: https://www.gpugrid.net/forum_thread.php?id=4213#42320

Thanks.

I thought that a project could set their own "report results immediately" flag, and I thought GPUGrid does this, as evidenced by their <report_immediately/> tag in their tasks.

So far as I know, just setting the Resource Share to 0, and not being able to get GPU tasks from any other project ... should accomplish the original poster's needs, of getting only 1 GPUGrid task.

If I'm wrong, my apologies.

So far as I know, that is what the behavior would be. But if one wanted to ensure it would behave comparably across projects within BOINC, the "report results immediately" tag would be the one to use.

Well, I did have one I posted here on this thread if you could take a look: https://www.gpugrid.net/forum_thread.php?id=4213#42320

Thanks.

What I'm saying is .... GPUGrid tasks are already instructed to report results immediately, via <report_immediately> ... such that there is now no need to set the global multi-project client setting for <report_results_immediately> anymore to get GPUGrid to behave that way.