Hi, my 750Ti (ubuntu, driver 343.22) has been happily running GERARD long runs and NOELIA short runs WUs with decent crunching times. Now, when it comes to processing the new long runs NOELIAs, it does not go beyond 5-7% GPU utilisation (even with everything else stopped) and of course it would take forever to finalise the WU. My other system with 660Tis, ubuntu also and same driver is crunching them just right (88% GPU).

Any idea?

Thanks

Thanks skgiven, I've tried they all, also reseting and detaching but no luck. If I change to a short run WU or Einstein, the GPU utilization is OK but when it is a long run NOELIA it just stops using the GPU.

So I will go back to short runs.

The NOELIA_ETQunboundx units do run a little slower than the GERARD_FXCXCL12_LIG_ units on my computers with GTX 690 cards, but nothing too dramatic. GPU usage is about 5% to 8% lower. Card temperature is about 5 degrees C lower.

Maybe something has changed on the Noelias? The NOELIA_ETQunboundx are running about 7 hours 25 minutes on my GTX 750 Tis, whereas the GERARD_FXCXCL12 take their leisurely 22 1/2 hours.
https://www.gpugrid.net/results.php?hostid=223541&offset=0&show_names=1&state=0&appid=

The Noelias do about 78% GPU load and 79% TDP, whereas the Gerards are about 84% GPU load and 89% TDP, as averaged by GPU-Z.
(I am on Win7 64-bit, with the 352.86 drivers).

Trotador

I was having this problem also. Ubuntu 14.04 64 bit. I upgraded my Nvidia driver from 64-340.46 to 64-346.72 and now the long NOELIA_ETQunboundx are running normal.

Jim

Trotador

I was having this problem also. Ubuntu 14.04 64 bit. I upgraded my Nvidia driver from 64-340.46 to 64-346.72 and now the long NOELIA_ETQunboundx are running normal.

Jim

Btw, you get good times with your 750Tis, overclocked?

My 750Tis are stock Evga Geforce SC superclocked 02G-P4-3753-KR listed as core clock 1176Mhz, boost clock 1255Mhz boost clock.

I have also found that the driver upgrade fixed problems I had on POEM@home, that I use as backup project. The 750Tis would not run there on the old drivers with out errors, now they run well.

Jim

My 750Ti is also an EVGA SC but I barely get half of the long run GERARD WUs under 24 hours even if the NVIDIA control panel shows 1320MHz. Both of you are achieving it routinely even in windows, mine is in Linux so I think there should be surely something I can improve.

It is a 32 threads machine but I restrict CPU crunching to 30 of them. The CPU is running at 3.3 GHz which is lower than yours but not a lot.

Then, what else?

It is a 32 threads machine but I restrict CPU crunching to 30 of them. The CPU is running at 3.3 GHz which is lower than yours but not a lot.

Then, what else?