BOINC 6.3.12 for Windows released

Message boards : Graphics cards (GPUs) : BOINC 6.3.12 for Windows released

Author	Message
koschi Send message Joined: 14 Aug 08 Posts: 124 Credit: 792,979,198 RAC: 11,592 Level Scientific publications	Message 2613 - Posted: 25 Sep 2008 \| 19:29:48 UTC Last modified: 25 Sep 2008 \| 19:33:22 UTC
	New version 6.3.12 is released: http://boinc.berkeley.edu/dl/boinc_6.3.12_windows_x86_64.exe http://boinc.berkeley.edu/dl/boinc_6.3.12_windows_intelx86.exe I hope the issues of 6.3.11 are solved and hope for a Linux version coming soon :)
	ID: 2613 \| Rating: 0 \| rate: / Reply Quote

The Gas Giant Send message Joined: 20 Sep 08 Posts: 54 Credit: 607,157 RAC: 0 Level Scientific publications	Message 2614 - Posted: 25 Sep 2008 \| 19:47:19 UTC
	LOL... On my quad it only runs PS3GRID on 1 cpu/gpu and leaves the other cores idle even though under 6.3.11 it would run other projects on the other cores....back to 6.3.11 for me.
	ID: 2614 \| Rating: 0 \| rate: / Reply Quote

computerguy09 Send message Joined: 20 Aug 08 Posts: 10 Credit: 15,789,768 RAC: 0 Level Scientific publications	Message 2615 - Posted: 25 Sep 2008 \| 20:11:33 UTC - in response to Message 2614.
	LOL... On my quad it only runs PS3GRID on 1 cpu/gpu and leaves the other cores idle even though under 6.3.11 it would run other projects on the other cores....back to 6.3.11 for me. Did you set your preferences to allow more than 1 CPU/GPU to run? Mark
	ID: 2615 \| Rating: 0 \| rate: / Reply Quote

naja002 Send message Joined: 25 Sep 08 Posts: 111 Credit: 10,352,599 RAC: 0 Level Scientific publications	Message 2616 - Posted: 25 Sep 2008 \| 20:24:34 UTC Last modified: 25 Sep 2008 \| 20:28:44 UTC
	Seems to be running the same as .11 for me. Vista HP 64 SP1, Q9450. Still takes 1 core to run the GPU....can't do that, so I am going to finish this WU and then wait for ya'll to get the 5 core deal sorted out. HTH EDIT: Just wanted to add--I shutdown .11, installed .12 and launched for a few minutes....ran the same as before. Rebooted and there was no change that I could see.....not sure what changes were made though...
	ID: 2616 \| Rating: 0 \| rate: / Reply Quote

The Gas Giant Send message Joined: 20 Sep 08 Posts: 54 Credit: 607,157 RAC: 0 Level Scientific publications	Message 2618 - Posted: 25 Sep 2008 \| 21:09:06 UTC - in response to Message 2615. Last modified: 25 Sep 2008 \| 21:22:20 UTC
	LOL... On my quad it only runs PS3GRID on 1 cpu/gpu and leaves the other cores idle even though under 6.3.11 it would run other projects on the other cores....back to 6.3.11 for me. Did you set your preferences to allow more than 1 CPU/GPU to run? Mark Is that a new preference? Otherwise I have my preferences set to run a max of 16 cpus (did that so I could set and forget it ages ago). [edit]In any case I re-installed and checked everywhere for a relevant preference....100% of processors is set. Even tried 120% ;) It was still only running a single gpu/cpu. I gone back to 6.3.11 (again). [/edit]
	ID: 2618 \| Rating: 0 \| rate: / Reply Quote

Rabinovitch Send message Joined: 25 Aug 08 Posts: 143 Credit: 64,937,578 RAC: 0 Level Scientific publications	Message 2625 - Posted: 26 Sep 2008 \| 1:15:23 UTC
	OK, I will not even try to use this buggy version...
	ID: 2625 \| Rating: 0 \| rate: / Reply Quote

Stefan Ledwina Send message Joined: 16 Jul 07 Posts: 464 Credit: 237,700,010 RAC: 4,775,275 Level Scientific publications	Message 2629 - Posted: 26 Sep 2008 \| 6:27:03 UTC Last modified: 26 Sep 2008 \| 6:27:17 UTC
	Just tried 6.3.12 on Vista64 and I have the same problem like the others here. BOINC only runs the GPUGRID task but not a single CPU task... ____________ pixelicious.at - my little photoblog
	ID: 2629 \| Rating: 0 \| rate: / Reply Quote

JKuehl2 Send message Joined: 18 Jul 08 Posts: 33 Credit: 3,233,174 RAC: 0 Level Scientific publications	Message 2631 - Posted: 26 Sep 2008 \| 6:53:51 UTC
	should have tested 6.3.12. wow that version was a masterpiece of programming! Cuda runs fine, but no other tasks are startet - hilarious... so my advice to everyone is do not install 6.3.11 or 6.3.12 use 6.3.10 instead I am a software developer and 6.3.12 would not have been even suitable for a daily build for our internal SVN... Who did the QA on that one?
	ID: 2631 \| Rating: 0 \| rate: / Reply Quote

sneakysaurus Send message Joined: 18 Jul 08 Posts: 6 Credit: 924,461 RAC: 0 Level Scientific publications	Message 2643 - Posted: 26 Sep 2008 \| 21:49:35 UTC
	6.3.12 works fine for me. To get going I just unsuspend 1 project at a time. I usually suspend all projects to start with then unsuspend GPUGRID, once running unsuspend other projects in this case only WCG , this then runs happily on 3 cores. I have had to to this for the last few versions on windows and linux. Now I want to sort out this ncpu+1 config. Since just now I have three cores running 100% on WCG and the 4th core less than 1% for GPUGRID. Would be good to use this spare power on another WCG WU. Any easy guides to setting the NCPU+1 setting?
	ID: 2643 \| Rating: 0 \| rate: / Reply Quote

The Gas Giant Send message Joined: 20 Sep 08 Posts: 54 Credit: 607,157 RAC: 0 Level Scientific publications	Message 2645 - Posted: 27 Sep 2008 \| 0:49:45 UTC - in response to Message 2643.
	6.3.12 works fine for me. To get going I just unsuspend 1 project at a time. I usually suspend all projects to start with then unsuspend GPUGRID, once running unsuspend other projects in this case only WCG , this then runs happily on 3 cores. I have had to to this for the last few versions on windows and linux. Now I want to sort out this ncpu+1 config. Since just now I have three cores running 100% on WCG and the 4th core less than 1% for GPUGRID. Would be good to use this spare power on another WCG WU. Any easy guides to setting the NCPU+1 setting? So you haven't looked at the ncpu+1 thread?
	ID: 2645 \| Rating: 0 \| rate: / Reply Quote

Post to thread

Message boards : Graphics cards (GPUs) : BOINC 6.3.12 for Windows released

	About	Science	Volunteers	Performance	Forum	Join us	Donate