Not working for me. Exits immediately after start.

Z

For me also, not working, exits immediately after start.

It does not display an error message calculation as before.

A+
*_*
____________

Both reporters with Beta app failures are getting error 0xc0000135, the standard "The application failed to intialize properly" error generated when a required DLL is missing.

Does anyone with the resources to buy a Titan (which excludes me) have the skill to run Dependency Walker over the application, and compare the results with the file declarations in client_state.xml?

Same here, 2 units on 2 different computers failed with - exit code -1073741515 (0xc0000135)

I tried to open the file with Dependency Walker client_state.xml
I have the following message in Walker,

J'ai essayé d'ouvrir le fichier client_state.xml avec Dependency Walker
j'ai le message suivant dans Walker,

No DOS or PE signature found. This file is not a valid 32-bit or 64 bit Windows Module
Error: At least one file was not a 32-bit or 64-bit Windows module.

You can download the file to my DropBox client_state.xml,

Vous pouvez télécharger le fichier client_state.xml dans ma DropBox,

https://dl.dropboxusercontent.com/u/63176535/client_state.xml

If you want something else, thank you to answer me.

Si vous souhaitez autre chose, merci de me répondre.

A+
*_*
____________

If you want something else, thank you to answer me.

I do not have 8 titans, but one TITAN, but every test I, the program adds a computer, then it is always the same.

@ +
*_*

Je n'ai pas 8 titans, mais une seule TITAN, mais à chaque que je test, le programme rajoute un ordinateur, alors que c'est toujours le même.

@+
*_*
____________

https://dl.dropboxusercontent.com/u/63176535/client_state.xml

If you want me to try to recalculate the GPUGRID units, leave me a message.

@ +
*_*

Si vous voulez que j'essaye de calculer à nouveau des unités GPUGRID, laissez moi un message.

@+
*_*
____________

I do not have 8 titans, but one TITAN, but every test I, the program adds a computer, then it is always the same.

What should be done to merge the accounts?

Que faut il faire pour fusionner les comptes ?
____________

Not accounts, computers. Log in to you're account, click on view computers, at the bottom you should see "Merge computers by name".

It's OK, tank you.

@+
*_*
____________

Don't know if I did this correctly but I set my machine with the two Titans to run test apps only (no long, short, beta boxes ticked), and it downloaded two WUs, a long and a short.

From client_state.xml;

I1R93-GIANNI_VIL1-2-3-RND5226_0 computation error and...
<![CDATA[ <message> (unknown error) - exit code -9 (0xfffffff7) </message> <stderr_txt> </stderr_txt> ]]>


I22R1-NATHAN_KIDc22_2-0-8-RND8049_0 computation error and...
<![CDATA[ <message> (unknown error) - exit code -9 (0xfffffff7) </message> <stderr_txt> </stderr_txt> ]]>

So, no joy today.

Operator
____________

I have one of the betas "Completed and validated".

http://www.gpugrid.net/workunit.php?wuid=4474992

I have one of the betas "Completed and validated".

http://www.gpugrid.net/workunit.php?wuid=4474992

I also received a short GIANNI, and it errored out after 1 second on my Titan:

I16R72-GIANNI_VIL1-1-3-RND0548_0
-9 (0xfffffffffffffff7) Unknown error number

My Titan is ready but no beta tasks.

I received 1 on my 660TI. Completed and validated in 66.50 seconds?

http://www.gpugrid.net/result.php?resultid=6893514

Operator, Uncheck the Project Preferences option to run other WU's, if no work is available for your chosen apps,

If you want something else, thank you to answer me.

I don't have any answers for you, but I would like to say I'm amazed with you're computers. When they get the bugs worked out and get the Titans working, you'll become the number 1 cruncher, I can't believe you have 8 of them (Titans).

I suggest you reread the thread, he detached and reattached 8 times, he needed to merge all 8 computers in to 1 which he hadn't done at the time I looked at his profile.

And about the Titan/780 crunch, any news?

I'm standing by to test the beta app, whenever new workunits become available. In the meantime my Titan will continue to crunch Einstein (5 concurrent workunits in sp mode *grin*) or Milkyway (6 concurrent workunits in dp mode *grin*).

In that context: Would be cool if most colleagues here without a GTX Titan could deselect beta apps in their account to leave a few workunits for those of us who have a Titan. ;) ... provided that the project staff has no other suggestions.

More beta workunits available.

gdf

I tried 8 of them and all errored out in about 3 secs. I am using the latest driver (320.18).

Two valid results with a GTX Titan!

I got two beta workunits today and both results were good.

32-GIANNI_TESTX8-0-1-RND5844_1
31-GIANNI_TESTX8-0-1-RND6917_1

Both ran a bit under a minute, here's a stderr output of one:

<core_client_version>7.0.64</core_client_version>
<![CDATA[
<stderr_txt>
MDIO: cannot open file "restart.coor"
# Time per step (avg over 25000 steps): 2.097 ms
# Approximate elapsed time for entire WU: 52.432 s
14:13:52 (2640): called boinc_finish

</stderr_txt>
]]>


Anybody else got valid results with a GTX Titan so far?

I tried again with my Titan, the units are always in error.

@+
*_*
____________

Hello Zarck,

it seems you only got non-beta workunits for your Titan today. Make sure you set your account as follows:

use Nvidia GPU -> yes
run test jobs -> yes

Run only the selected applications
ACEMD short runs for CUDA 4.2: -> no
ACEMD short runs for CUDA 3.1: -> no
ACEMD beta: -> yes
ACEMD long runs for CUDA 4.2: -> no

If no work for selected applications is available, accept work from other applications? -> no
Use Graphics Processing Unit (GPU) if available -> yes
Use Central Processing Unit (CPU) -> yes

Btw, you can use one of the venues (home, work, school) to make sure your hosts w/o a Titan are not affected by above settings.

In the meantime I got three more beta workunits which also validated ok. Seems these are all resends, send out first on the 27th of May.

Regards

Thank you Beorn

I checked my parameters, they seem correct. But I do not get units.

@ +
*_*
____________

I received another beta on my 660TI. It errored out in 1 second. This was a different version than the first one that completed successfully.
http://www.gpugrid.net/result.php?resultid=6919729

(unknown error) - exit code -1073741511 (0xc0000139)

This workunit failed on another 660 Ti and finished ok on a 550 Ti (Fermi). A Kepler problem? And it was also a resend from the 27th.

Btw, any plans to distribute more betas? Currently my Titan is offline, I'm plan to move it to another hosts on the weekend.

My 780 is currently at folding@home. Waiting for more betas from here.

GPUGRID supports double precision mode for the GeForce TITAN ?



Tank you
____________

GPUGrid doesnt need DP. Only MW does.
____________
DSKAG Austria Research Team: http://www.research.dskag.at

Tank you for you reply.

@+
*_*
____________

Before I had a calculation error in the first second.

Now there is a calculation error at the end of the units.

@+
*_*
____________

Well, I'm not to certain how long these are supposed to take, but so far, they're not so short on my 780. Running one now with nothing else on BOINC allowed besides the BETA:

75% Power currently being used

89% GPU usage

1.2 GB RAM usage.

Temp= 55C

Same here with my Titan (not overclocked),
big crash at the end of the WU, very frustrating :(

http://www.gpugrid.net/results.php?hostid=141263

Here's the link to my crash as well:

http://www.gpugrid.net/result.php?resultid=6932859

Why do these units not have swan_sync enabled? The CPU and GPU times do not match up like they have been ever since 4.2(?) was released.

The good news is, the failures seem to be of a common origin.

EDIT: I also suspended GPUgrid in BOINC until further units are released. Devs, might as well clear these ones out. I doubt gathering more information would help by rerunning them.

Before I had a calculation error in the first second.

Now there is a calculation error at the end of the units.

http://www.gpugrid.net/results.php?userid=5128

@+
*_*

Client_state.xml in my DropBox ->

https://dl.dropboxusercontent.com/u/63176535/client_state.xml
____________

Anybody seen the latest points update - looks like these failed work units are effecting the tally board.
Hope that they are only test units and no data from them is being relied upon.
Are those points earned today correct ??
586,692,703 points today just can't be right - surely ??
If correct, we will have no work to do as Titans will have it all finished in a few days !!

Have done 17 Noelia beta tasks on Linux, no issues.

SAM, on gk110?

Looks like I received 15 more of these betas. All failed in the first 1-3 seconds with same error.
-1073741511 (0xffffffffc0000139) Unknown error number.

I think the only one that didn't fail was while running Linux.

Any possibility of an update? REALLY want to bring mine over here.

It's my understanding that the facility now has a couple of GTX Titans to do development work with, is this true?

And if true, are the beta WU you are sending out failing on your own Titans?

Operator
____________

Beta app is for windows only. Will be for linux also?

The units are still in error. I tested several versions of Boinc and Geforce driver with the same result.

http://www.gpugrid.net/results.php?userid=5128

@+
*_*

Client_state.xml in my DropBox ->

https://dl.dropboxusercontent.com/u/63176535/client_state.xml
____________

Any update on this front?

I'm wanting to get the GTX780 but if problem persists might go 2xGTX770.

____________
terencewee*
Sicituradastra.

Thank you Stefan.

I'm sure this will get resolved.

____________
terencewee*
Sicituradastra.

Not the best news, but thank you for the update. Will keep crunching at Einstein. Keep up the great work, and look forward to bringing my 780 over here.

Cheers

The latest NOELIA_1MG beta units were running fine on my windows 7 computer, until I received a "run time limit exceeded error". It happened at the 55 minute mark. So what going on with this?

New test with the latest Beta units that day.

With my GeForce Titan + Windows 8 64 bits + Driver GeForce 320.49 WHQL + Boinc 7.1.18.

http://boinc.berkeley.edu/dl/?C=M;O=D

Still error.

Client_state.xml in my DropBox

https://dl.dropboxusercontent.com/u/63176535/client_state.xml

@ +
* _ *
____________

I just had 4 NOELIA_1MG units all fail, on my Windows 8.1 Preview x64 OS.

The details were:
- all failed at RunTime: 3,422
- all failed with error: 197 (0xc5) EXIT_TIME_LIMIT_EXCEEDED
- all failed with error message: Maximum elapsed time exceeded

I believe 3 of them were attempted on my GTX 460, and 1 was attempted on my GTX 660 Ti.

Is there some sort of 57-minute-limit hard-coded into these?!?

82equ-NOELIA_1MG-0-1-RND5404_0
http://www.gpugrid.net/result.php?resultid=7014519
80equ-NOELIA_1MG-0-1-RND8782_0
http://www.gpugrid.net/result.php?resultid=7014517
77equ-NOELIA_1MG-0-1-RND9934_0
http://www.gpugrid.net/result.php?resultid=7014514
20equ-NOELIA_1MG-0-1-RND1123_0
http://www.gpugrid.net/result.php?resultid=7014441

I just now caught on that there were more betas available and set my Titan machine to download.

I got 34equ-NOELIA_1MG-0-1-RND8981_1 (one task only) even though i have two Titans in that box.

It said the estimated completion time was around 45 seconds. That elapsed and the system said it was at only a little over 1% completed. I'm thinking the estimation calc is somehow skewed. But the task is running...ON A GTX TITAN on Windows 7 64bit!

That's progress!

I will post back with results when complete.

Operator
____________

I got 34equ-NOELIA_1MG-0-1-RND8981_1....

I will post back with results when complete.

There has been no announcement that these NOELIA_1MG WU's are specifically intended for Titan's.

On Windows they are all failing for every card type with the same error.
Some have succeed on Linux (different app though). Would be good to know if anyone with a Titan on Linux ran one...

6 ACEMD beta received, all failed after 2298 seconds (38,3 minutes).

<core_client_version>7.0.64</core_client_version>
<![CDATA[
<message>
Maximum elapsed time exceeded
</message>
<stderr_txt>
MDIO: cannot open file "restart.coor"


Unhandled Exception Detected...

- Unhandled Exception Record -
Reason: Breakpoint Encountered (0x80000003) at address 0x755F3219

Engaging BOINC Windows Runtime Debugger...

Is there some sort of 57-minute-limit hard-coded into these?!?

<core_client_version>7.0.64</core_client_version>
<![CDATA[
<stderr_txt>
MDIO: cannot open file "restart.coor"
# Time per step (avg over 440000 steps): 11.604 ms
# Approximate elapsed time for entire WU: 6092.349 s
09:09:41 (3464): called boinc_finish

</stderr_txt>
]]>

What we lack: Even a single occurrence where a Windows Titan crunched a Beta app successfully.

Thank you. The (new?) batch sent out today still has the "Maximum elapsed time exceeded" problem apparently.

http://www.gpugrid.net/workunit.php?wuid=4581360

Could finish a total of four since Friday successfully (Titan + Win7 64bit + manual edit)...

They're not syncing up with CPU for whatever reason. I don't know if this is a problem, or the problem, but it seems rather odd.

Any updates on this? Is the dev who was gone back? Getting a little antsy :)

Will be completing my rig later this week. Ordering 2nd. 780 tonight.

I´m revamping my farm, and alrdy buy 3 new 770´s. Would be awesome if the GK110 works on GPUGRID. The 790 may be a double gk110 card, so...

I´m revamping my farm, and alrdy buy 3 new 770´s. Would be awesome if the GK110 works on GPUGRID. The 790 may be a double gk110 card, so...

Any updates on this? Is the dev who was gone back? Getting a little antsy :)