hi
I get this error with the gtx 260 card but i was also getting it with a 8800GT SLI.. the task works well a while and after that it crashes. Any solutions? the card isn't overclocked.. and it has the latest 260 gtx drivers from gainward.. when i had the 8800gt i also used the latest drivers.


error message: acemd2_6.03_windows_intelx86__cuda has stopped working

Problem signature:
Problem Event Name: APPCRASH
Application Name: acemd2_6.03_windows_intelx86__cuda
Application Version: 0.0.0.0
Application Timestamp: 4b797f87
Fault Module Name: acemd2_6.03_windows_intelx86__cuda
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 4b797f87
Exception Code: 40000015
Exception Offset: 0003278d
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
Additional Information 1: ccdd
Additional Information 2: ccddc5252e7f04a9aad0435e8f8c5a00
Additional Information 3: 3f4d
Additional Information 4: 3f4d0b9b8e7d369176075ced935c27e0

Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Hi!

hi
I get this error with the gtx 260 card but i was also getting it with a 8800GT SLI.. the task works well a while and after that it crashes. Any solutions? the card isn't overclocked.. and it has the latest 260 gtx drivers from gainward.. when i had the 8800gt i also used the latest drivers.

Make a note of which type of GPUGrid task was running at the time, and if it's hERG, *_pYEEI_*, *_TRYP_*, or any of the types listed (or discussed) in the sticky 'information and issues' threads at the top of this message board, post about it there.

Many of these crashes are data/parameter related: crashes happen with particular, recognisable classes of task, even when the BOINC/driver combination is working flawlessly on other tasks.

I installed the drivers that HTH suggested. but it stil gives the error.
I installed 3 versions of boinc until now.. they all make the same error.

@Richard Haselgrove
how do i see witch type of task it is?
anyway.. almost every time the task fails.

here is the screenshot of boinc in the last error: http://i40.tinypic.com/2vmswer.png

i will keep watching this thread because i have a powerful video card and i want to make boinc use it.

the frequencies are at the default level on the video card and i even set the cooler at 90% power to see if this was the problem but it still crashed.


another error message:
Problem signature:
Problem Event Name: APPCRASH
Application Name: acemd2_6.03_windows_intelx86__cuda
Application Version: 0.0.0.0
Application Timestamp: 4b797f87
Fault Module Name: acemd2_6.03_windows_intelx86__cuda
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 4b797f87
Exception Code: 40000015
Exception Offset: 0003278d
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
Additional Information 1: ccdd
Additional Information 2: ccddc5252e7f04a9aad0435e8f8c5a00
Additional Information 3: 5fcd
Additional Information 4: 5fcdf6e394e42b3416b1a08c59fe12ad

Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

if any admins want to make tests with my video card or something i am willing to collaborate.. and even give access to my computer via VNC and TeamViewer.. also i cand tell my email address via private message in the forum

@Richard Haselgrove
how do i see witch type of task it is?

to any people reading that have found this page via google because i optimized the thread for google to be found while searching "acemd2_6.03_windows_intelx86__cuda has stopped working": first visit the link below because there are solutions that could fix your problem
http://www.gpugrid.net/forum_thread.php?id=1314

http://www.gpugrid.net/forum_thread.php?id=1314

i've run the project again after installing cuda 3.0 but it still gives the error
and i've tried the Milkyway gpu project and it works without error

The problem here is that you, like me, have a GTX 260-192 which due to a persistent bug in all drivers since the 185 series is no longer able to run GPUGRID without problems.

For further details see the thread about it Is the problem with GTX260 solved

Kind ergards

Alain

I just recently had this happen on my GTX-260 (216 55nm) Win7 64-bit rig, but it turned out to be just because I had started a graphics-intensive program (FarCry2) and had forgotten to stop BOINC first. Apparently when the GPU gets overloaded to that extent (trying to run both FC2 and the GPUGRID task) the entire graphics driver crashes and the task gets a computation error status. It was obviously a stupid mistake on my part. Restarting the machine and aborting the task fixed it.

The computer in question is here:
http://www.gpugrid.net/show_host_detail.php?hostid=43920
the task in question is here:
http://www.gpugrid.net/result.php?resultid=2336710
I won't do that again.